Apr 24 2012

From The Space Library

Revision as of 14:07, 18 March 2016 by RobertG (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

RELEASE: 12-108 NASA TESTS GPS MONITORING SYSTEM FOR BIG U.S. EARTHQUAKES

WASHINGTON -- The space-based technology that lets GPS-equipped motorists constantly update their precise location will undergo a major test of its ability to rapidly pinpoint the location and magnitude of strong earthquakes across the western United States. Results from the new Real-time Earthquake Analysis for Disaster (READI) Mitigation Network soon could be used to assist prompt disaster response and more accurate tsunami warnings. The new research network builds on decades of technology development supported by the National Science Foundation, the Department of Defense, NASA, and the U.S. Geological Survey (USGS). The network uses real-time GPS measurements from nearly 500 stations throughout California, Oregon and Washington. When a large earthquake is detected, GPS data are used to automatically calculate its vital characteristics including location, magnitude and details about the fault rupture. "With the READI network we are enabling continued development of real-time GPS technologies to advance national and international early warning disaster systems," said Craig Dobson, natural hazards program manager in the Earth Science Division at NASA Headquarters in Washington. "This prototype system is a significant step towards realizing the goal of providing Pacific basin-wide natural hazards capability around the Pacific 'Ring of Fire.'" Accurate and rapid identification of earthquakes of magnitude 6.0 and stronger is critical for disaster response and mitigation efforts, especially for tsunamis. Calculating the strength of a tsunami requires detailed knowledge of the size of the earthquake and associated ground movements. Acquiring this type of data for very large earthquakes is a challenge for traditional seismological instruments that measure ground shaking. High-precision, second-by-second measurements of ground displacements using GPS have been shown to reduce the time needed to characterize large earthquakes and to increase the accuracy of subsequent tsunami predictions. After the capabilities of the network have been fully demonstrated, it is intended to be used by appropriate natural hazard monitoring agencies. USGS and the National Oceanic and Atmospheric Administration are responsible for detecting and issuing warnings on earthquakes and tsunamis, respectively. "By using GPS to measure ground deformation from large earthquakes, we can reduce the time needed to locate and characterize the damage from large seismic events to several minutes," said Yehuda Bock, director of Scripps Institution of Oceanography's Orbit and Permanent Array Center in La Jolla, Calif. "We now are poised to fully test the prototype system this year." The READI network is a collaboration of many institutions including Scripps at the University of California in San Diego; Central Washington University in Ellensburg; the University of Nevada in Reno; California Institute of Technology/Jet Propulsion Laboratory (JPL) in Pasadena; UNAVCO in Boulder, Colo.; and the University of California at Berkeley. NASA, NSF, USGS, and other federal, state, and local partners support the GPS stations in the network, including the EarthScope Plate Boundary Observatory, the Pacific Northwest Geodetic Array, the Bay Area Regional Deformation Array and the California Real-Time Network. "The relatively small investments in GPS-based natural hazards systems have revolutionized the way we view the Earth and allowed us to develop this prototype system with great potential benefits for the infrastructure and population in earthquake-prone states in the western United States," said Frank Webb, Earth Science Advanced Mission Concepts program manager at JPL. The READI network is the outgrowth of nearly 25 years of U.S. government research efforts to develop the capabilities and applications of GPS technology. The GPS satellite system was created by the Department of Defense for military and ultimately civil positioning needs. NASA leveraged this investment by supporting development of a global GPS signal receiving network to improve the accuracy and utility of GPS positioning information. Today that capability provides real-time, pinpoint positioning and timing for a wide variety of uses from agriculture to Earth exploration. "Conventional seismic networks have consistently struggled to rapidly identify the true size of great earthquakes during the last decade," said Timothy Melbourne, director of the Central Washington University's Pacific Northwest Geodetic Array. "This GPS system is more likely to provide accurate and rapid estimates of the location and amount of fault slip to fire, utility, medical and other first-response teams." The GPS earthquake detection capability was first demonstrated by NASA-supported research on a major 2004 Sumatra quake conducted by Geoffrey Blewitt and colleagues at the University of Nevada in Reno.

RELEASE: 12-127 J-2X ENGINE READY FOR SECOND TEST SERIES

WASHINGTON -- The next-generation engine that will help carry humans deeper into space than ever is back, bigger and better. The J-2X engine is currently on the A-2 Test Stand at NASA's Stennis Space Center in Mississippi for an extensive round of tests to build on last year's successful test firings. The engine will provide upper-stage power for NASA's evolved Space Launch System (SLS), a new heavy-lift rocket capable of missions to deep space. "We're making steady and tangible progress on our new heavy-lift rocket that will launch astronauts on journeys to destinations farther in our solar system," said NASA Administrator Charles Bolden, who recently visited Stennis and saw the J-2X in its test stand. "As we continue test firings of the J-2X engine and a myriad of other work to open the next great chapter of exploration, we're demonstrating our commitment right now to America's continued leadership in space." The space agency conducted an initial round of sea-level tests on the first developmental engine last year. This second test series will simulate high-altitude conditions where the atmospheric pressure is low. The SLS will use J-2X engines on the second stage of flight after the first stage is jettisoned. "The first round of testing helped us get to know the engine, how it operates and its basic performance characteristics," said Tom Byrd, J-2X engine lead in the SLS Liquid Engines Office at NASA's Marshall Space Flight Center in Huntsville, Ala. "Now, we're looking forward to testing J-2X in the SLS flight configuration, collecting nozzle data and continuing to learn about the performance of the engine itself." NASA has worked closely with the J-2X prime contractor, Pratt and Whitney Rocketdyne of Canoga Park, Calif., to prepare the J-2X engine, dubbed E10001for its second round of tests. The J-2X engine nozzle is different from the nozzle used on the space shuttle main engine for the last 30 years of space missions. While the space shuttle main engine nozzle was hydrogen cooled to save weight, the J-2X hydrogen-cooled nozzle is shorter and attached to a lightweight, passively cooled nozzle extension. A total of 16 tests are scheduled, tentatively beginning this Wednesday. They are expected to conclude by the end of this year. In its first round of testing, the J-2X engine reached 100 percent power in just four tests and achieved a full flight-duration firing of 500 seconds in its eighth test, faster than any other U.S. engine. The engine was fired a total of 10 times for a cumulative 1,040 seconds of testing various aspects of performance. The J-2X is a redesign of the heritage J-2 engine that helped send astronauts to the moon during the Apollo Program in the 1960s and 1970s. In addition to testing the engine, NASA is conducting tests on the J-2X powerpack, which includes the gas generator, oxygen and fuel turbopumps, and related ducts and valves. Tests of the powerpack components are being conducted on the A-1 Test Stand at Stennis. The J-2X is being developed for NASA by Pratt and Whitney Rocketdyne. It is the first new liquid oxygen and liquid hydrogen rocket engine developed in 40 years that will be rated to carry humans into space.

RELEASE: 12-129 NASA'S WEBB TELESCOPE FLIGHT BACKPLANE SECTION COMPLETED

WASHINGTON -- The center section of the backplane structure that will fly on NASA's James Webb Space Telescope has been completed, marking an important milestone in the telescope's hardware development. The backplane will support the telescope's beryllium mirrors, instruments, thermal control systems and other hardware throughout its mission. "Completing the center section of the backplane is an important step in completing the sophisticated telescope structure," said Lee Feinberg, optical telescope element manager for the Webb telescope at NASA's Goddard Space Flight Center in Greenbelt, Md. "This fabrication success is the result of innovative engineering dating back to the technology demonstration phase of the program." The center section, or primary mirror backplane support structure, will hold Webb's 18-segment, 21-foot-diameter primary mirror nearly motionless while the telescope peers into deep space. The center section is the first of the three sections of the backplane to be completed. Measuring approximately 24 by 12 feet yet weighing only 500 pounds, the center section of the backplane meets unprecedented thermal stability requirements. The backplane holds the alignment of the telescope's optics through the rigors of launch and over a wide range of operating temperatures, which reach as cold as - 406 degrees Fahrenheit. During science operations, the backplane precisely keeps the 18 primary mirror segments in place, permitting the mirrors to form a single, pristine shape needed to take sharp images. The Northrop Grumman Corporation in Redondo Beach, Calif., and its teammate ATK in Magna, Utah, completed construction of the center section. Northrop Grumman is under contract to Goddard for the design and development of Webb's sunshield, telescope and spacecraft. ATK manufactured 1,781 composite parts of the center section using lightweight graphite materials and advanced manufacturing techniques. Successor to the Hubble Space Telescope, the Webb telescope is the world's next-generation space observatory and will be the most powerful space telescope ever built. It will observe the most distant objects in the universe, provide images of the very first galaxies ever formed and study planets around distant stars. The Webb telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency.

CONTRACT RELEASE: C12-106 NASA AWARDS SAFETY AND MISSION ASSURANCE SERVICES CONTRACT

WASHINGTON -- NASA has awarded a contract to ARES Technical Services Corporation of Vienna, Va., for Safety and Mission Assurance Services (SMAS) for the Goddard Safety and Mission Assurance Directorate, located at NASA's Goddard Space Flight Center in Greenbelt, Md. This is a cost-plus fixed-fee indefinite-delivery, indefinite-quantity contract with a maximum ordering value of $180 million. The effective ordering period is from June 1, 2012 through May 31, 2017. This is a follow-on contract and a small business set-aside acquisition. ARES will provide on-site and off-site safety and mission assurance services to support spacecraft and instruments being developed at Goddard and by industry, universities, other NASA centers and international partners. The contract will support flight projects such as Joint Polar Satellite System, James Webb Space Telescope, Magnetospheric Multiscale Mission, Tracking and Data Relay Satellite System-K, Geostationary Operational Environmental Satellite-R Series and new projects under formulation. Additional contract support will include mission assurance engineering, systems safety services, reliability and risk assessment services. Included also in the contract are software assurance services, institutional support services, systems review services, flight hardware technology assurance and information technology support services.

MEDIA ADVISORY: M12-076 SHUTTLE ENTERPRISE FLIGHT OVER NEW YORK CITY METRO AREA MOVED TO APRIL 27

WASHINGTON -- NASA managers, in coordination with Intrepid Sea, Air and Space Museum officials, tentatively are targeting Friday, April 27, for the ferry of space shuttle Enterprise from Washington Dulles International Airport to John F. Kennedy (JFK) International Airport in New York. Managers shifted the flight from Wednesday to Friday because of a large region of low pressure dominating the East Coast. The weather is predicted to be more favorable Friday. NASA's 747 Shuttle Carrier Aircraft (SCA) with Enterprise mounted atop will fly at a relatively low altitude over various parts of the New York City metropolitan area on Friday. The aircraft is expected to fly near a variety of landmarks, including the Statue of Liberty and Intrepid. After the flyover is complete, the SCA will land at JFK. The Federal Aviation Administration is coordinating the flight, which is scheduled to occur between 9:30 and 11:30 a.m. EDT, weather permitting. The exact route and timing depend on weather and operational constraints. Enterprise was mated to the SCA Saturday morning and covers were fitted over the shuttle's vent doors to prevent rain intrusion while the vehicle awaits its transfer from Dulles. The covers will be removed before flight. Media will have access to the public areas at Dulles to view the departure of Enterprise. Media sending crews to Dulles should contact the Metropolitan Washington Airports Authority Office of Public Affairs at 703-417-8370. During the weeks following the arrival, Enterprise will be demated from the 747 and placed on a barge that will move by tugboat up the Hudson River to Intrepid in June. The shuttle will be lifted by crane and placed on the flight deck of the Intrepid, where it will be on exhibit to the public starting this summer in a temporary climate-controlled pavilion. The Intrepid continues to work on a permanent exhibit facility to showcase Enterprise that will enhance the museum's space-related exhibits and education curriculum. If the flight is postponed for any reason, an additional notice will be released.

RELEASE: 12-130 NASA'S SPITZER FINDS GALAXY WITH SPLIT PERSONALITY

WASHINGTON -- While some galaxies are rotund and others are slender disks like our spiral Milky Way, new observations from NASA's Spitzer Space Telescope show that the Sombrero galaxy is both. The galaxy, which is a round, elliptical with a thin disk embedded inside, is one of the first known to exhibit characteristics of the two different types. The findings will lead to a better understanding of galaxy evolution, a topic still poorly understood. "The Sombrero is more complex than previously thought," said Dimitri Gadotti of the European Southern Observatory in Chile and lead author of a new paper on the findings appearing in the Monthly Notices of the Royal Astronomical Society. "The only way to understand all we know about this galaxy is to think of it as two galaxies, one inside the other." The Sombrero galaxy, also known as NGC 4594, is located 28 million light-years away in the constellation Virgo. From our viewpoint on Earth, we can see the thin edge of its flat disk and a central bulge of stars, making it resemble a wide-brimmed hat. Astronomers do not know whether the Sombrero's disk is shaped like a ring or a spiral, but agree it belongs to the disk class. "Spitzer is helping to unravel secrets behind an object that has been imaged thousands of times," said Sean Carey of NASA's Spitzer Science Center at the California Institute of Technology in Pasadena, Calif.. "It is intriguing Spitzer can read the fossil record of events that occurred billions of years ago within this beautiful and archetypal galaxy." Spitzer captures a different view of the galaxy than visible-light telescopes. In visible views, the galaxy appears to be immersed in a glowing halo, which scientists had thought was relatively light and small. With Spitzer's infrared vision, a different view emerges. Spitzer sees old stars through the dust and reveals the halo has the right size and mass to be a giant elliptical galaxy. While it is tempting to think the giant elliptical swallowed a spiral disk, astronomers say this is highly unlikely because that process would have destroyed the disk structure. Instead, one scenario they propose is that a giant elliptical galaxy was inundated with gas more than nine billion years ago. Early in our universe, networks of gas clouds were common, and they sometimes fed growing galaxies, causing them to bulk up. The gas would have been pulled into the galaxy by gravity, falling into orbit around the center and spinning out into a flat disk. Stars would have formed from the gas in the disk. "This poses all sorts of questions," said Rub?n S?nchez-Janssen from the European Southern Observatory, co-author of the study. "How did such a large disk take shape and survive inside such a massive elliptical? How unusual is such a formation process?" Researchers say the answers could help them piece together how other galaxies evolve. Another galaxy, called Centaurus A, appears also to be an elliptical galaxy with a disk inside it. But its disk does not contain many stars. Astronomers speculate that Centaurus A could be at an earlier stage of evolution than the Sombrero and might eventually look similar. The findings also answer a mystery about the number of globular clusters in the Sombrero galaxy. Globular clusters are spherical nuggets of old stars. Ellipticals typically have a few thousand, while spirals contain a few hundred. The Sombrero has almost 2,000, a number that makes sense now but had puzzled astronomers when they thought it was only a disk galaxy.

RELEASE: 12-133 NASA ISSUES STATEMENT ON SPACEX LAUNCH DATE

WASHINGTON -- In response to SpaceX's announcement that it has delayed launch of its Falcon 9 rocket and Dragon spacecraft from April 30 to May 7, NASA issued the following statement from Associate Administrator for Human Exploration and Operations William Gerstenmaier: "We appreciate that SpaceX is taking the necessary time to help ensure the success of this historic flight. We will continue to work with SpaceX in preparing for the May 7 launch to the International Space Station."