STS-96

From The Space Library

Revision as of 18:46, 28 February 2013 by Special:Contributions/ (Talk)
Jump to: navigation, search
STS-96
Organization NASA-OfficeofSpaceFlight(UnitedStates)
Mission type Human Crew
Launch date May 27, 1999 (1999-05-27)
Launch vehicle Space Shuttle
Launch site Cape Canaveral, United States
COSPAR ID 1999-030A
Experiments Here
Alternate Names 25760
Additional Information Here
Telecommunications Information Here
Data Collection Here
Payload Mass Up 10299.72 kg


STS 96 was an American shuttle spacecraft. Its primary mission was to ferry two tons of supplies and spare parts to the International Space Station. The crew carried out some repair and maintainance work on ISS and installed mufflers to reduce the noisy fans in the Zarya module. The crew also installed a Russian crane called Strela on Zarya. The shuttle also boosted ISS to a higher altitude and released a small free-flying sphere named STARSHINE to encourage students to track it visually. Other payloads on STS-96 were the Student Tracked Atmospheric Research Satellite for Heuristic International Networking Equipment (STARSHINE), the Shuttle Vibration Forces Experiment (SVF) and the Orbiter Integrated Vehicle Health Monitoring - HEDS Technology Demonstration (IVHM HTD). The STARSHINE satellite consisted of an inert, 19-inch hollow sphere covered by 1,000 evenly-distributed, flat, polished mirrors, each 1 inch in diameter. The payload consisted of the STARSHINE satellite, integrated with the Pallet Ejection System (PES), then mounted inside a lidless carrier. The HH equipment consisted of one HH Lightweight Avionics Plate (LAP), then mounted inside a lidless carrier. Additional HH equipment consists of one Hitchhiker Ejection System Electronics (HESE), one 5.0 cubic-foot HH canister, and one Adapter Beam Assembly (ABA). The purpose of the mission was to train international student volunteer observers to visually track this optically reflective spacecraft during morning and evening twilight intervals for several months, calculate its orbit from shared observations, and derive atmospheric density from drag-induced changes in its orbit over time. The Shuttle Vibration Forces (SVF) Experiment provided flight measurements of the vibratory forces acting between an aerospace payload and its mounting structure. The force transducers were incorporated into four custom brackets which will replace the existing brackets used to attach the 5 ft standard canister to the side wall GAS adapter beam. The payload was activated automatically by the Orbiter Lift-off vibration and will operate for approximately 100 seconds. STS-96 was the second flight of the SVF experiment The purpose of the Orbiter Integrated Vehicle Health Monitoring- HEDS Technology Demonstration (IVHM HTD) was to demonstrate competing modern, off-the-shelf sensing technologies in an operational environment to make informed design decisions for the eventual Orbiter upgrade IVHM. The objective of IVHM was to reduce planned ground processing, streamline problem troubleshooting (unplanned ground processing), enhance visibility into systems operation and improve overall vehicle safety.


Mission patch: